Henny Penny PFG-691 Bedienungsanleitung PDF herunterladen (Seite 10)

Model 691

2-10. TESTING THE FRYER Each Henny Penny pressure fryer was completely checked

and tested prior to shipment. However, it is good practice

to check the unit again after installation.

2-11. GAS LEAK TEST

Prior to turning the gas supply on, be sure the gas control

valve knob on the gas control valve is in the OFF position.

The word OFF is at the bottom of the knob when the valve

is closed.

After the piping and fittings have been installed, check for gas

leaks. A simple checking method is to turn on the gas and brush

all connections with a soap solution. If bubbles occur, it indi-

cates escaping gas. In this event, the piping connection must be

redone.

To avoid fire or explosion, never use a lighted match

or open flame to test for gas leaks. Ignited gas could

result in severe personal injury and/or property

damage.

2-10 803

1 2 ... 5 6 7 8 9 10 11

Keine Kommentare

Henny Penny PFG-691 Bedienungsanleitung Seite 10